if: Difference between revisions

From Bohemia Interactive Community
Jump to navigation Jump to search
m (formatting)
m (Text replacement - "<sqf>([^↵][^<]*↵[^<]*)<\/sqf>" to "<sqf> $1 </sqf>")
 
(20 intermediate revisions by 3 users not shown)
Line 2: Line 2:


|game1= ofp
|game1= ofp
|version1= 1.85
|version1= 1.85


|game2= ofpe
|game2= ofpe
|version2= 1.00
|version2= 1.00


|game3= arma1
|game3= arma1
|version3= 1.00
|version3= 1.00


|game4= arma2
|game4= arma2
|version4= 1.00
|version4= 1.00


|game5= arma2oa
|game5= arma2oa
 
|version5= 1.50
|version5= 1.51


|game6= tkoh
|game6= tkoh
|version6= 1.00
|version6= 1.00


|game7= arma3
|game7= arma3
|version7= 0.50
|version7= 0.50


Line 33: Line 26:
|descr= This operator creates a [[If Type]] which is used in the if-construct as described [[Control_Structures#if-Statement|here]].
|descr= This operator creates a [[If Type]] which is used in the if-construct as described [[Control_Structures#if-Statement|here]].


|s1= '''if''' condition
|s1= [[if]]  condition
 
|p1= condition: [[Boolean]] - if it evaluates as [[true]], the [[then]] clause is executed.  Otherwise, the [[else]] clause (if present) is executed


|p1= condition: [[Boolean]] expression. If it evaluates as 'true', the 'then' clause is executed.  Otherwise, the 'else' clause (if present) is executed.
|r1= [[If Type]] - predicate which will execute 1st or 2nd option when used. This predicate is used in [[then]] or [[exitWith]] commands


|r1= [[If Type]] - Predicate which will execute 1st or 2nd option when used. This predicate is used in [[then]] or [[exitWith]] commands.
|x1= <sqf>
_retVal = if (1 > 0) then { "It's true" } else { "It's false" };
hint str _retVal;
</sqf>


|x1= <code>_retVal = [[if]] (1 > 0) [[then]] { "It's true" } [[else]] { "It's false" };
|x2= <sqf>
[[hint]] [[str]] _retVal</code>
_val = if (true) then [{ "true" }, { "false" }];
hint _val;
</sqf>


|x2 = <code>_val = [[if]] ([[true]]) [[then]] [ { "true" }, { "false" } ];
|seealso= [[else]] [[exitWith]] [[then]] [[Control Structures]] [[Code_Optimisation#Lazy_evaluation|Lazy evaluation]]
[[hint]] _val;</code>
}}


|seealso= [[else]], [[exitWith]], [[then]], [[Control Structures]], [[Code_Optimisation#Lazy_evaluation|Lazy evaluation]]
{{Note
|user= Ceeeb
|timestamp= 20070131040800
|text= Any _local variables you declare within the body of an [[if]]/[[then]] statement (ie between the curly braces) are local to that 'if' statement, and are destroyed at the end of the statement. If you know you want to use the variable outside the 'if' statement, make sure your declare it before the 'if' statement.
}}
}}


<dl class="command_description">
{{Note
<!-- Note Section BEGIN -->
|user= Galzohar
<dd class="notedate">Posted on Jan 31, 2007 - 04:08</dd>
|timestamp= 20100117024000
<dt class="note">[[User:Ceeeb|Ceeeb]]<dd class="note">
|text= If the condition is nil then neither the "then" nor the "else" section get executed, but the script will proceed with no error messages.<br>
Any _local variables you declare within the body of an [[if]]/[[then]] statement (ie between the curly braces) are local to that 'if' statement, and are destroyed at the end of the statement. If you know you want to use the variable outside the 'if' statement, make sure your declare it before the 'if' statement.
<dd class="notedate">Posted on Jan 17, 2010 - 02:40</dd>
<dt class="note">[[User:Galzohar|Galzohar]]<dd class="note">
{{GVI|arma2|1.05}} If the condition is nil then neither the "then" nor the "else" section get executed, but the script will proceed with no error messages.<br><br>
Example code:
Example code:
<code>[[hint]] "script started"; //will get executed
<sqf>
[[if]] (nil) [[then]]
systemChat "script started"; // will get executed
if (nil) then
{
{
[[hint]] "true"; // will never get executed
systemChat "true"; // will never get executed
}
}
[[else]]
else
{
{
[[hint]] "false"; // will never get executed
systemChat "false"; // will never get executed
};
};
[[sleep]] 3;
systemChat "script ended"; // will get executed
[[hint]] "script ended"; //will get executed</code>
</sqf>
</dl>
|game= arma2
<dl class="command_description">
|version= 1.05
<dd class="notedate">Posted on June 5, 2015 - 09:35 (UTC)</dd>
}}
<dt class="note">[[User:AgentRevolution|AgentRevolution]]</dt>
 
<dd class="note">
{{Note
If you only need to choose between 2 raw values, it is possible to use the following trick to avoid using code blocks, as required by the if command, which results in greater atomicity and faster execution:
|user= AgentRev
<code>_result = [falseValue, trueValue] [[select]] condition;</code>
|timestamp= 20150605093500
|text= If you only need to choose between 2 raw values, it is possible to use the following trick to avoid using code blocks, as required by the if command, which results in greater atomicity and faster execution:
<sqf>_result = [falseValue, trueValue] select condition;</sqf>
The select command treats "false" as 0 and "true" as 1, therefore you can feed it a condition determining the array index of the value to be returned. Here is another example:
The select command treats "false" as 0 and "true" as 1, therefore you can feed it a condition determining the array index of the value to be returned. Here is another example:
<code>_result = [1,-1] select (_this < 0); // If _this is less than 0, _result will be equal to -1, otherwise it will be 1</code>
<sqf>_result = [1,-1] select (_this < 0); // if _this is less than 0, _result will be equal to -1, otherwise it will be 1</sqf>
This feature was added in Arma 3.
}}
</dd>
 
</dl>
{{Note
|user= DreadedEntity
|timestamp= 20220519011146
|text= When using '''if''' to assign values to a variable, if you not have an [[else]] block it is treated as [[nil]] and returned, setting the variable value to [[nil]]. A3 2.08.149102
<sqf>
private _myVar = "value";
private _condition = false;
_myVar = if (_condition) then { "another value" }; //perfectly valid sqf
systemChat str (isNil "_myVar"); //returns true
//_myVar is now nil
_myVar = if (_condition) then { "another value" } else { "value" };
systemChat _myVar; //returns "value"
</sqf>
This behavior can be both desirable and undesirable depending on your needs
}}

Latest revision as of 19:43, 3 September 2024

Logo A0.png1.85ofpe logo.png1.00Logo A1 black.png1.00Logo A2.png1.00A2 OA Logo.png1.50tkoh logo small.png1.00Arma 3 logo black.png0.50
Hover & click on the images for description

Description

Description:
This operator creates a If Type which is used in the if-construct as described here.
Groups:
Program Flow

Syntax

Syntax:
if condition
Parameters:
condition: Boolean - if it evaluates as true, the then clause is executed. Otherwise, the else clause (if present) is executed
Return Value:
If Type - predicate which will execute 1st or 2nd option when used. This predicate is used in then or exitWith commands

Examples

Example 1:
_retVal = if (1 > 0) then { "It's true" } else { "It's false" }; hint str _retVal;
Example 2:
_val = if (true) then [{ "true" }, { "false" }]; hint _val;

Additional Information

See also:
else exitWith then Control Structures Lazy evaluation

Notes

Report bugs on the Feedback Tracker and/or discuss them on the Arma Discord or on the Forums.
Only post proven facts here! Add Note
Ceeeb - c
Posted on Jan 31, 2007 - 04:08 (UTC)
Any _local variables you declare within the body of an if/then statement (ie between the curly braces) are local to that 'if' statement, and are destroyed at the end of the statement. If you know you want to use the variable outside the 'if' statement, make sure your declare it before the 'if' statement.
Galzohar - c
Posted on Jan 17, 2010 - 02:40 (UTC)
Logo A2.png1.05

If the condition is nil then neither the "then" nor the "else" section get executed, but the script will proceed with no error messages.
Example code:

systemChat "script started"; // will get executed if (nil) then { systemChat "true"; // will never get executed } else { systemChat "false"; // will never get executed }; systemChat "script ended"; // will get executed

AgentRev - c
Posted on Jun 05, 2015 - 09:35 (UTC)
If you only need to choose between 2 raw values, it is possible to use the following trick to avoid using code blocks, as required by the if command, which results in greater atomicity and faster execution:
_result = [falseValue, trueValue] select condition;
The select command treats "false" as 0 and "true" as 1, therefore you can feed it a condition determining the array index of the value to be returned. Here is another example:
_result = [1,-1] select (_this < 0); // if _this is less than 0, _result will be equal to -1, otherwise it will be 1
DreadedEntity - c
Posted on May 19, 2022 - 01:11 (UTC)
When using if to assign values to a variable, if you not have an else block it is treated as nil and returned, setting the variable value to nil. A3 2.08.149102
private _myVar = "value"; private _condition = false; _myVar = if (_condition) then { "another value" }; //perfectly valid sqf systemChat str (isNil "_myVar"); //returns true //_myVar is now nil _myVar = if (_condition) then { "another value" } else { "value" }; systemChat _myVar; //returns "value"
This behavior can be both desirable and undesirable depending on your needs
Retrieved from "https://community.bistudio.com/wiki?title=if&oldid=369387"