Event Handlers – Arma 3
Lou Montana (talk | contribs) m (Some wiki formatting) |
Lou Montana (talk | contribs) (Add Penetrated projectile's Event Handler missing documentation) |
||
| Line 1,844: | Line 1,844: | ||
* projectile: [[Object]] | * projectile: [[Object]] | ||
* active: [[Boolean]] - new active state of the mine | * active: [[Boolean]] - new active state of the mine | ||
==== Penetrated ==== | |||
This event fires as many times as the projectile penetrates a surface. | |||
<sqf> | |||
_projectile addEventHandler ["Penetrated", { | |||
params ["_projectile", "_hitObject", "_surfaceType"(?), "_entryPoint"(ASL?ATL?), "_exitPoint"(ASL?ATL?), "_exitVector"]; | |||
}]; | |||
</sqf> | |||
* projectile: [[Object]] | |||
* hitObject: [[Object]] | |||
* surfaceType: [[String]] - see [[surfaceType]] | |||
* entryPoint: [[Array]] format [[Position#PositionASL|PositionASL]] - the projectile's entry point | |||
* exitPoint: [[Array]] format [[Position#PositionASL|PositionASL]] - the projectile's exit point | |||
* exitVector: [[Array]] format [[Vector]] - speed/angle exit vector (see [[vectorMagnitude]] to obtain the speed, in metre per second) | |||
Revision as of 16:04, 9 February 2024
An Event Handler (abbreviated to EH) allows you to automatically monitor and then execute custom code upon particular events being triggered.
See also Event Scripts for special event triggered scripts.
- 1. Basic Event Handlers
- 2. Multiplayer Event Handlers
- 3. Mission Event Handlers
- 4. UserAction Event Handlers
- 5. Projectile Event Handlers
- 6. Group Event Handlers
- 7. Player's UI Event Handlers
- 8. UI Event Handlers (Displays and Controls)
- 9. Music Event Handlers
- 10. Eden Editor
- 11. Public Variable Broadcast Event
- 12. Weapon Config Muzzle Events
- 13. BI Scripted Events
Basic Event Handlers
The object-based Event Handler is always executed on the computer where it was added.
Commands:
Standard
AnimChanged
GAGlobal
Triggered every time a new animation is started. This EH is only triggered for the 1st animation state in a sequence.
- unit: Object - object the event handler is assigned to
- anim: String - name of the anim that is started
AnimDone
GAGlobal
Triggered every time an animation is finished. Triggered for all animation states in a sequence.
- unit: Object - object the event handler is assigned to
- anim: String - name of the anim that has been finished
AnimStateChanged
GAGlobal
Triggered every time an animation state changes. Triggered for all animation states in a sequence.
- unit: Object - object the event handler is assigned to
- anim: String - name of the anim that has been started
CargoLoaded
GAGlobal
Triggered when a vehicle is loaded into another vehicle (ViV).
It can be added to either the transport vehicle, or the cargo vehicle, and will fire for both cases.
- parentVehicle: Object - the transport (parent) vehicle
- cargoVehicle: Object - the cargo (child) vehicle
CargoUnloaded
GAGlobal
Triggered when a vehicle is unloaded from another vehicle (ViV).
It can be added to either the transport vehicle, or the cargo vehicle, and will fire for both cases.
- parentVehicle: Object - the transport (parent) vehicle
- cargoVehicle: Object - the cargo (child) vehicle
ContainerClosed
GAGlobal
Triggers when player finished accessing cargo container.
This event handler is similar to InventoryClosed EH, but needs to be assigned to the container rather than the player.
Note: will trigger only for the unit opening container.
ContainerOpened
GAGlobal
Triggers when cargo container is accessed by player.
This event handler is similar to InventoryOpened EH, but needs to be assigned to the container rather than the player and cannot be overridden.
Note: will trigger only for the unit opening container.
ControlsShifted
GAGlobalLELocal
Triggers when control of a vehicle is shifted (pilot->co-pilot, co-pilot->pilot), usually when user performs an action such as TakeVehicleControl, SuspendVehicleControl, UnlockVehicleControl, LockVehicleControl, or when enableCopilot command is used. This event handler will always fire on the PC where action is triggered as well as where the vehicle is local at the time. When control of the vehicle is shifted, the locality of the vehicle changes to the locality of the new controller. For example, if helicopter is local to the server and co-pilot takes controls, the helicopter changes locality to co-pilot PC.
This means that if "ControlsShifted" EH was added on both server and client, "Take Controls" action will trigger EH on both, client and server PC, but subsequent co-pilot "Release Controls" action will trigger only on co-pilot's PC, because vehicle will be local to co-pilot at this point. There is also a slightly better mission version of ControlsShifted event handler.
- vehicle: Object - vehicle which controls were shifted
- activeCoPilot: Object - co-pilot unit which controls vehicle after this event. objNull if co-pilot is not controlling the vehicle
- oldController: Object - unit who controlled vehicle before this event
Dammaged
GAGlobal
Triggered when the unit is damaged. In ArmA works with all vehicles not only men like in OFP.
Notes:
- The typo is "intentional": it is Dammaged with two "m".
- If simultaneous damage occured (e.g. via grenade) EH might be triggered several times.
- The Dammaged EH will not necessarily fire if only minor damage occurred (e.g. firing a bullet at a tank), even though the damage increased.
- unit: Object - object the event handler is assigned to
- hitSelection: String - name of the selection where the unit was damaged
- damage: Number - resulting level of damage
1.68 hitPartIndex: Number - hit index of the hit selection- 1.68 hitPoint: String - hit point Cfg name
- 1.70 shooter: Object - shooter reference (to get instigator use getShotParents on projectile)
- 1.70 projectile: Object - the projectile that caused damage
Deleted
GAGlobal
Triggered just before the assigned entity is deleted.
- entity: Object - object the event handler is assigned to
Disassembled
LALocal
Triggers when entity such as weapon/backpack gets disassembled. EH should be attached to the entity.
- entity: Object - object the event handler is assigned to
- primaryBag: Object - first backpack object which was entity disassembled into
- secondaryBag: Object - second backpack object which was entity disassembled into
Engine
GAGlobal
Triggered when the engine of the unit is turned on/off.
- vehicle: Object - vehicle the event handler is assigned to
- engineState: Boolean - true when the engine is turned on, false when turned off
EpeContact
GAGlobal
Triggered when object collision (PhysX) is in progress.
- object1: Object - object with attached handler
- object2: Object - object which is colliding with object1
- select1: String - selection of object1 which is colliding - not in use at this moment, empty string is always returned
- select2: String - selection of object2 which is colliding - not in use at this moment, empty string is always returned
- force: Number - force of collision
- 2.12reactVect: Array - impact reaction force vector
- 2.12worldPos: PositionWorld - point of impact in world coordinates
EpeContactEnd
GAGlobal
Triggered when object collision (PhysX) ends.
- object1: Object - object with attached handler
- object2: Object - object which is colliding with object1
- select1: String - selection of object1 which is colliding - not in use at this moment, empty string is always returned
- select2: String - selection of object2 which is colliding - not in use at this moment, empty string is always returned
- force: Number - force of collision
EpeContactStart
GAGlobal
Triggered when object collision (PhysX) starts.
- object1: Object - object with attached handler
- object2: Object - object which is colliding with object1
- select1: String - selection of object1 which is colliding - not in use at this moment, empty string is always returned
- select2: String - selection of object2 which is colliding - not in use at this moment, empty string is always returned
- force: Number - force of collision
- 2.12reactVect: Array - impact reaction force vector
- 2.12worldPos: PositionWorld - point of impact in world coordinates
Explosion
GAGlobal
Triggered when a vehicle or unit is damaged by a nearby explosion.
It can be assigned to a remote unit or vehicle but will only fire on the PC where EH is added and explosion is local, i.e. it really needs to be added on every PC and JIP and will fire only where the explosion is originated.
- vehicle: Object - object the event handler is assigned to
- damage: Number - damage inflicted to the object
2.10 source: Object - may be objNull in some cases
Fired
GAGlobal
Triggered when the unit fires a weapon.
This EH will not trigger if a unit fires out of a vehicle. For those cases an EH has to be attached to that particular vehicle.
When "Manual Fire" is used, the gunner is objNull if gunner is not present or the gunner is not the one who fires.
To check if "Manual Fire" is on, use isManualFire. The actual shot instigator could be retrieved with getShotParents command.
- unit: Object - object the event handler is assigned to
- weapon: String - fired weapon
- muzzle: String - muzzle that was used
- mode: String - current mode of the fired weapon
- ammo: String - ammo used
- magazine: String - magazine name which was used
- projectile: Object - object of the projectile that was shot out
- 1.66 gunner: Object - gunner whose weapons are firing.
FiredMan
GAGlobal
Triggered when the unit fires a weapon. This EH must be attached to a soldier and unlike with "Fired" EH, it will fire regardless of whether the soldier is on foot or firing vehicle weapon.
For remoteControled unit use "Fired" EH instead.
- unit: Object - unit the event handler is assigned to (the instigator)
- weapon: String - fired weapon
- muzzle: String - muzzle that was used
- mode: String - current mode of the fired weapon
- ammo: String - ammo used
- magazine: String - magazine name which was used
- projectile: Object - object of the projectile that was shot out
- vehicle: Object - vehicle, if weapon is vehicle weapon, otherwise objNull
FiredNear
GAGlobal
Triggered when a weapon is fired somewhere near the unit or vehicle. It is also triggered if the unit itself is firing.
(Exception(s): the Throw weapon wont broadcast the FiredNear event).
When "Manual Fire" is used, the gunner is objNull if gunner is not present or the gunner is not the one who fires.
To check if "Manual Fire" is on, use isManualFire. The actual shot instigator could be retrieved with getShotParents command.
1.30 Works with thrown weapons.
- unit: Object - object the event handler is assigned to
- firer: Object - object which fires a weapon near the unit
- distance: Number - distance in meters between the unit and firer (max. distance ~69m)
- weapon: String - fired weapon
- muzzle: String - muzzle that was used
- mode: String - current mode of the fired weapon
- ammo: String - ammo used
- 1.66 gunner: Object - gunner, whose weapons are fired
Fuel
GAGlobal
Triggered when the vehicle's fuel status changes between non-empty and empty or between empty and non-empty.
- vehicle: Object - vehicle the event handler is assigned to
- hasFuel: Boolean - false when has no fuel, true when has some fuel
Gear
GAGlobal
Triggered when the unit lowers/retracts the landing gear, whether it is a helicopter or a plane.
Also triggered for helicopters in landing mode, regardless if they have retractable gear or not.
- vehicle: Object - vehicle the event handler is assigned to
- gearState: Boolean - true when the gear is lowered, false when retracted
GestureChanged
GAGlobal
Triggered every time a new gesture is played.
- unit: Object - object the event handler is assigned to
- gesture: String - name of the gesture that has started playing
GestureDone
GAGlobal
Triggered every time a gesture is finished.
- unit: Object - object the event handler is assigned to
- gesture: String - name of the gesture that has been finished
GetIn
GAGlobal
Triggers when a unit enters the vehicle to which this EH has been added. This EH is triggered by moveInXXXX commands and "GetInXXXX" actions, but not upon a seat change within the same vehicle.
In vehicles with multi-turret setup, entering any turret will show "gunner" for position.
- vehicle: Object - vehicle the event handler is assigned to
- role: String - can be either "driver", "gunner" or "cargo"
- unit: Object - unit that entered the vehicle
- 1.36 turret: Array - turret path
GetInMan
GAGlobal
Triggers when a unit enters a vehicle. Similar to "GetIn" but must be assigned to a unit and not vehicle.
Persistent on respawn if assigned where unit was local. This EH is triggered by moveInXXXX commands and "GetInXXXX" actions.
- unit: Object - unit the event handler is assigned to
- role: String - can be either "driver", "gunner" or "cargo"
- vehicle: Object - vehicle the unit entered
- turret: Array - turret path
GetOut
GAGlobal
Triggers when a unit gets out from the vehicle to which this EH has been added.
This EH is triggered by moveOut, "GetOut" & "Eject" actions, if an alive crew member disconnects or is deleted, but not upon a seat change within the same vehicle.
- vehicle: Object - vehicle the event handler is assigned to
- role: String - can be either "driver", "gunner" or "cargo"
- unit: Object - unit that left the vehicle
- 1.36 turret: Array - turret path
- 2.14 isEject: Boolean - true if unit used 'Eject' action
GetOutMan
GAGlobal
Triggers when a unit exits a vehicle. Similar to "GetOut" but must be assigned to a unit and not vehicle.
Persistent on respawn if assigned where unit was local. This EH is triggered by moveOut and "GetOut" & "Eject" actions.
- unit: Object - unit the event handler is assigned to
- role: String - can be either "driver", "gunner" or "cargo"
- vehicle: Object - vehicle that the unit left
- turret: Array - turret path
- 2.14 isEject: Boolean - true if unit used 'Eject' action
HandleDamage
GAGlobal
Triggers when the unit is damaged and fires for each damaged selection separately
Note: Currently, in Arma 3 v1.70 it triggers for every selection of a vehicle, no matter if the section was damaged or not). Works with all vehicles.
This EH can accept a remote unit as argument however it will only fire when the unit is local to the PC this event handler was added on.
For example, you can add this event handler to one particular vehicle on every PC.
When this vehicle gets hit, only EH on PC where the vehicle is currently local will fire.
If code provided returns a numeric value, this value will overwrite the default damage of given selection after processing. Return value of 0 will make the unit invulnerable if damage is not scripted in other ways (i.e using setDamage and/or setHit for additional damage handling). If no value is returned, the default damage processing will be done. This allows for safe stacking of this event handler. Only the return value of the last added "HandleDamage" EH is considered.
Notes:
- Multiple "HandleDamage" EHs can be added to the same unit. If multiple EHs return damage value for custom damage handling, only last returned value will be considered by the engine.
EHs that do not return value can be safely added after EHs that do return value.
- You can save the last event as timestamp (diag_tickTime) onto the unit, as well as the current health of the unit/its selections, with setVariable and query it on each "HandleDamage" event with getVariable to define a system how to handle the "HandleDamage" event.
- "HandleDamage" will continue to trigger even if the unit is already dead.
- "HandleDamage" is persistent. If you add it to the player object, it will continue to exist after player respawned.
- "HandleDamage" can trigger "twice" per damage event. Once for direct damage, once for indirect damage (explosive damage). This can happen even in the same frame, but is unlikely.
- Use setMissionOptions to filter out no damage calls or fake head hit.
Additional Celery's explanation (Updated by ShadowRanger for Arma 3).
- unit: Object - object the event handler is assigned to
- selection: String - name of the selection where the unit was damaged.
- "" for overall structural damage
- "?" for unknown selections
- damage: Number - resulting level of damage for the selection
- source: Object - the source unit that caused the damage
- projectile: String - classname of the projectile that caused inflicted the damage. ("" for unknown, such as fall damage)
- 1.50 hitPartIndex: Number - hit part index of the hit point, -1 otherwise
- 1.66 instigator: Object - person who pulled the trigger
- 1.68 hitPoint: String - hit point Cfg name
- 2.12 directHit: Boolean - true for direct projectile damage, false for explosion splash damage and all other kinds of damage like fall damage, fire damage, collision damage, etc.
- 2.18 context: Number - some additional context for the event:
0 : TotalDamage - total damage adjusted before iteration through hitpoints
1 : HitPoint - some hit point processed during iteration
2 : LastHitPoint - the last hitpoint from iteration is processed
3 : FakeHeadHit - head hit that is added/adjusted
4 : TotalDamageBeforeBleeding - total damage is adjusted before calculating bleeding
HandleHeal
GAGlobal
Triggered when unit starts to heal (player using heal action or AI heals after being ordered).
Triggers only on PC where EH is added and unit is local.
If code returns false, engine side healing follows.
Return true if you handle healing in script, use AISFinishHeal to tell engine that script side healing is done.
See also lifeState and setUnconscious commands.
NOTE: This Event Handler is broken but somewhat usable.
When attached to a unit it will fire when medic action is started (not finished!) on the unit.
_this select 0 will be the unit itself, _this select 1 will be the healer.
The 3rd param will always be false and neither returning true nor using AISFinishHeal will have any effect on the engine default healing behaviour.
If unit walks away from the healer during healing action, the heal will not finish but there is no way to detect this within "HandleHeal" framework.
This code will fix unit to 100% health after self-use of medpack:
HandleIdentity
GAGlobal
Triggered whenever an entity is created. Can be used in scripts if EH is added immediately after unit is created in unscheduled environment.
Doesn't trigger for editor placed units. Does not work in Multiplayer. If EH scope returns true, the default engine identity application is overridden.
- unit: Object - object the event handler is assigned to
HandleRating
LALocal
Triggered when engine adds rating to overall rating of the unit, usually after a kill or a friendly kill.
If EH code returns Number, this will override default engine behaviour and the resulting value added will be the one returned by EH code.
HandleScore
GAGlobalSEServer
Triggered when engine adds score to overall score of the unit, usually after a kill.
If the EH code returns Nothing or true, the default engine scoreboard update (score, vehicle kills, infantry kills, etc) is applied, if it returns false, the engine update is cancelled. To add or modify score, use addScore and addScoreSide commands.
For remote units like players, the event does not persist after respawn, and must be re-added to the new unit.
NOTE: MP only.
- unit: Object - object the event handler is assigned to
- object: Object - object for which score was awarded
- score: Number - score to be added
Hit
LALocal
Triggered when the unit is hit/damaged.
Is not always triggered when unit is killed by a hit.
Most of the time only the killed event handler is triggered when a unit dies from a hit.
The hit EH will not necessarily fire if only minor damage occurred (e.g. firing a bullet at a tank), even though the damage increased.
Does not fire when a unit is set to allowDamage false.
- unit: Object - object the event handler is assigned to
- source: Object - object that caused the damage – contains unit in case of collisions
- damage: Number - level of damage caused by the hit
- 1.66 instigator: Object - person who pulled the trigger
HitPart
GAGlobal
Runs when the object it was added to gets injured/damaged.
It returns the position and component that was hit on the object within a nested array, this is because the model may have more than one selection name for the hit component
(i.e. a single piece of geometry can be simultaneously part of multiple, overlapping named selections).
While you can add "HitPart" handler to a remote unit, the respective addEventHandler command must be executed on the shooter's PC and will only fire on shooter's PC as well. The event will not fire if the shooter is not local, even if the target itself is local. Additionally, if the unit gets damaged by any means other than ammunition or explosions, such as fall damage and burning, "HitPart" will not fire. Because of this, this event handler is most suitable for when the shooter needs feedback on his shooting, such as target practicing or hitmarker creation.
This EH returns array of sub-arrays [[...],[...], ... [...]]. Each sub-array contains data for the part that was hit as usually multiple parts are hit at the same time (see HitPart_Sample). The structure of each sub-array is listed below.
- target: Object - object that got injured/damaged
- shooter: Object - unit or vehicle that inflicted the damage. If injured by a vehicle collision, the target itself is returned, or in case of explosions, the null object.In case of explosives that were planted by someone (e.g. satchel charges), that unit is returned
- projectile: Object - object that was fired
- position: Array format PositionASL - position the bullet impacted
- velocity: Vector3D - 3D speed at which the bullet impacted
- selection: Array - array of Strings with named selection of the object that were hit, in the FireGeometry LOD.
- ammo: Array - ammo info: [hit value, indirect hit value, indirect hit range, explosive damage, ammo class name]; Or, in case of a vehicle collision: [impulse value, 0, 0, 0]; hit and damage values are derived from the projectile's CfgAmmo class, and do not match the actual damage inflicted, which is usually lower due to armor and other factors
- vector: Vector3D - vector that is orthogonal (perpendicular) to the surface struck. For example, if a wall was hit, vector would be pointing out of the wall at a 90 degree angle
- radius: Number - radius (size) of component hit
- surface: String - surface type struck
- direct: Boolean - true if object was directly hit, false if it was hit by indirect/splash damage
Init
GAGlobal
Triggered whenever an entity is created. Cannot be used in scripts, only inside class Eventhandlers in config.
e.g:
init = "params ['_entity'];";
- entity: Object - object the event handler is assigned to
IncomingMissile
GAGlobal
Triggered when a unit fires a missile or rocket at the target. For projectiles fired by players this EH only triggers for guided missiles that have locked onto the target.
- target: Object - object the event handler is assigned to
- ammo: String - ammo type that was fired on the target
- 1.42 vehicle: Object - vehicle that fired the weapon. In case of soldier, unit is returned
- 1.66 instigator: Object - person who pulled the trigger
- 2.10 missile: Object - the incoming missile
InventoryClosed
GAGlobal
Triggered when the unit closes inventory. Said unit can be non-local when adding the EH, but must be local for the EH to trigger.
- unit: Object - object the event handler is assigned to
- targetContainer: Object - connected container or weaponholder
InventoryOpened
GAGlobal
Triggered when unit opens inventory. Said unit can be non-local when adding the EH, but must be local for the EH to trigger. End EH main scope with true to override the opening of the inventory in case you wish to handle it yourself:
- unit: Object - object the event handler is assigned to
- targetContainer: Object - connected container or weaponholder
- 1.66 secondaryContainer: Object - second connected container or weaponholder or objNull
Killed
LALocal
Triggered when the unit is killed.
Be careful when the killer has been a vehicle. For most cases the reference of the vehicle is the same as the effectiveCommander, but not always.
- unit: Object - object the event handler is assigned to
- killer: Object - object that killed the unit. Contains the unit itself in case of collisions
- 1.66 instigator: Object - person who pulled the trigger
- 1.68 useEffects: Boolean - same as useEffects in setDamage alt syntax
LandedTouchDown
GAGlobal
Triggered when a plane (AI or player) touches the ground.
- plane: Object - object the event handler is assigned to
- airportID: Number - ID of the airport (-1 for anything else)
- 2.12 airportObject: Object - airport object in the event of a Dynamic Airport, otherwise objNull
LandedStopped
GAGlobal
Triggered when an AI pilot would get out usually. Not executed for player.
- plane: Object - object the event handler is assigned to
- airportID: Number - ID of the airport (-1 for anything else)
- 2.12 airportObject: Object - airport object in the event of a Dynamic Airport, otherwise objNull
Landing
GAGlobal
Triggered when an AI pilot (or auto-pilot) is preparing for landing. The exact moment of triggering coincides with lowering of the gear ("Gear" EH)
- plane: Object - object the event handler is assigned to
- airportID: Number or Object - ID of the airport or aircraft carrier object
- isCarrier: Boolean - true if landing on aircraft carrier
LandingCanceled
GAGlobal
Triggered when AI pilot landing is cancelled (for example new order received to land elsewhere).
The exact moment of triggering coincides with retracting of the gear ("Gear" EH).
Note: Doesn't trigger if player switches off auto-pilot. Canceled is spelled with one L
- plane: Object - object the event handler is assigned to
- airportID: Number or Object - ID of the airport or aircraft carrier object (-1 no airport)
- isCarrier: Boolean - true if landing on aircraft carrier
LeaningChanged
GAGlobal
Triggered when a soldier leaning factor is changed between -1 (extreme left), 0 (not leaning) and 1 (extreme right)
Local
GAGlobal
Triggers when locality of object in MP is changed. The event handler only triggers on the computers that are directly involved in change of locality.
So if EH is added to every computer on network, it will only trigger on 2 computers, on the computer that receives ownership of the object (new owner), in which case _this select 1 will be true,
and on the computer from which ownership is transferred (old owner), in which case _this select 1 will be false.
- entity: Object - the object that changed locality
- local: Boolean - if the object is local on given computer
OpticsModeChanged
LALocal
Triggers everytime a local unit changes optic mode. This could be either through the setOpticsMode command or by the player switching to the next optic mode using e.g NUM / or Ctrl + 
.
- unit: Object - the unit
- opticsClass: String
- newMode: String
- oldMode: String
- isADS: Boolean - if the new view is GUNNER
OpticsSwitch
LALocal
Triggers at the start of the camera transition from GUNNER to INTERNAL/EXTERNAL and vice-versa.
So anytime the right mouse button is pressed and there is a GUNNER view available or are currently in it, this triggers. Works in vehicles and FFV as well. See also cameraView.
PathCalculated
LALocal
Triggers when a path has been calculated for the unit. Works for both agents and normal AI units.
Note that paths to far destinations are typically calculated in segments. When the unit completes a segment, a new path is calculated and this is continued until the unit reaches its destination.
- unit: Object - the unit/agent for which the path was calculated
- path: Array - the array of positions representing the path (PositionASL)
PeriscopeElevationChanged
Fires every frame during periscope elevation animation.
- vehicle: Object - the vehicle this EH is assigned to
- turret: Array - the turret which periscope is changing elevation
- elevation: Number - current periscope elevation (changes with each simulation). See also periscopeElevation, elevatePeriscope
- direction: Number - 1:moves up, 0:stopped, -1:moves down; when direction returns 0, this also means the event handler fired for the last time for this elevation.
- userIsBlocked: Boolean - whether or not the user ability to override is blocked. See also periscopeElevation, elevatePeriscope
PostInit
GAGlobal
Triggered whenever an entity is created and initialized. Cannot be used in scripts, only inside class Eventhandlers in config.
e.g:
postInit = "params ['_entity'];";
postinit = "params ['_entity']; if (local _entity) then { [_entity, '', [], false] call BIS_fnc_initVehicle };";
- entity: Object - object the event handler is assigned to
PostReset
Obsolete - triggers after PP effects have been reset by the engine.
Put
GAGlobal
Triggers when a unit puts an item in a container.
2.14 This event handler can be added to a container.
- unit: Object - unit who put the item in the container
- container: Object - the container into which the item was placed (vehicle, box, etc.)
- item: String - the class name of the moved item
Reloaded
LALocal
Triggers when a weapon is reloaded with a new magazine. For more information see: Reloaded
- unit: Object - unit or vehicle to which EH is assigned
- weapon: String - weapon that got reloaded
- muzzle: String - weapon's muzzle that got reloaded
- newMagazine: Array - new magazine info
- oldMagazine: Array or Nothing - old magazine info
Respawn
LALocal
Triggered when a unit respawns.
- unit: Object - object the event handler is assigned to
- corpse: Object - object the event handler was assigned to, aka the corpse/unit player was previously controlling
RopeAttach
Triggered when a rope is attached to an object.
In the case of sling loading, this event handler must be assigned to the helicopter and will trigger for each attached rope.
- object 1: Object - object to which the event handler is assigned.
- rope: Object - the rope being attached between object 1 and object 2.
- object 2: Object - the object that is being attached to object 1 via rope.
RopeBreak
Triggered when a rope is detached from an object.
In the case of sling loading, this event handler must be assigned to the helicopter and will trigger for each detached rope.
- object 1: Object - object to which the event handler is assigned.
- rope: Object - the rope being detached between object 1 and object 2.
- object 2: Object - the object that is being detached from object 1 via rope.
SeatSwitched
GAGlobal
Triggered when unit changes seat within vehicle. EH returns both units switching seats.
If switching seats with an empty seat, one of the returned units will be objNull.
The new position can be obtained with assignedVehicleRole <unit>.
This EH must be assigned to a vehicle.
- vehicle: Object - vehicle to which the event handler is assigned.
- unit1: Object - unit switching seat.
- unit2: Object - unit switching seat.
SeatSwitchedMan
GAGlobal
Triggered when unit changes seat within vehicle. EH returns both units switching seats.
If switching seats with an empty seat, one of the returned units will be objNull.
The new position can be obtained with assignedVehicleRole <unit>. This EH must be assigned to a unit and not a vehicle.
This EH is persistent and will be transferred to the new unit after respawn, but only if it was assigned where unit was local.
- unit1: Object - unit switching seat.
- unit2: Object - unit with which unit1 is switching seat.
- vehicle: Object - vehicle where switching seats is taking place.
SlotItemChanged
GAGlobal
Triggered when any of the following slots get assigned or unassigned: Items - Map, GPS, Radio, Watch, Compass, Helmet, Goggles, NVG; Weapon - Binoculars; Containers - Uniform, Vest, Backpack.
- unit: Object - unit EH assigned to.
- name: String - name of the item/weapon/container (see getSlotItemName).
- slot: Number - slot id (see getSlotItemName).
- assigned: Boolean - true assign action, false unassign action.
SoundPlayed
LALocal
Triggered when player is making noises when injured or fatigued for example. The number param passed to the EH code, points to the sound origin:
- Breath
- Breath Injured
- Breath Scuba
- Injured
- Pulsation
- Hit Scream
- Burning
- Drowning
- Drown
- Gasping
- Stabilizing
- Healing
- Healing With Medikit
- Recovered
- Breath Held
Suppressed
LALocal
Triggers when enemy projectile is passing by closer than defined suppression radius ammo value in config. Can be made to trigger for the same side if the side is set as enemy to itself (with setFriend).
- unit: Object - unit to which the event is assigned
- distance: Number - distance of the projectile pass-by
- shooter: Object - who (or what) fired - vehicle or drone
- instigator: Object - who pressed the trigger. Instigator is different from the shooter when player is operator of UAV for example
- ammoObject: Object - the ammunition itself
- ammoClassName: String - the ammunition's classname
- ammoConfig: Config - the ammunition's CfgAmmo config path
Take
GAGlobal
Triggers when a unit takes an item from a container.
2.14 This event handler can be added to a container.
- unit: Object - unit who took the item from the container
- container: Object - the container from which the item was taken (vehicle, box, etc.)
- item: String - the class name of the taken item
TaskSetAsCurrent
Triggers when player's current task changes
TurnIn
Triggers when member of crew in a vehicle uses Turn In action
- vehicle: Object - the vehicle the event handler is assigned to
- unit: Object - the unit performing the Turn In action
- turret: Array - turret path
TurnOut
Triggers when member of crew in a vehicle uses Turn Out action
- vehicle: Object - the vehicle the event handler is assigned to
- unit: Object - the unit performing the Turn Out action
- turret: Array - turret path
VisionModeChanged
Triggers when the assigned vehicle/unit's vision mode has changed.
- person: Object - unit for whom the vision mode changes
- visionMode: Number - vision mode index
- TIindex: Number - thermal vision mode index; will return -1 when visionMode is not 2
- visionModePrev: Number - last vision mode
- TIindexPrev: Number - last TI mode; will return -1 when visionModePrev is not 2
- vehicle: Object - if unit is in a vehicle or controlling a UAV, this will be the vehicle
- turret: Array - turret path to the turret occupied by the unit, or [] if not on turret
WeaponAssembled
GAGlobal
Triggers when weapon gets assembled. EH should be attached to the unit and not the weapon.
- unit: Object - object the event handler is assigned to
- weapon: Object - object of the assembled weapon
WeaponDisassembled
GAGlobal
Triggers when weapon gets disassembled. EH should be attached to the unit and not the weapon.
NOTE: As of Arma 3 v1.32, this event does not fire if the weapon is not local.
- unit: Object - object the event handler is assigned to
- primaryBag: Object - first backpack object which was weapon disassembled into
- secondaryBag: Object - second backpack object which was weapon disassembled into
WeaponDeployed
GAGlobal
Triggers when the deployed state of a weapon or bipod changes. Note: A weapon cannot be rested and deployed at the same time.
WeaponRested
LALocal
Triggers when weapon rested state changes (weapon near a surface that can provide weapon support).
Note: A weapon cannot be rested and deployed at the same time.
SelectedActionPerformed
RTM helicopter user action event
SelectedActionChanged
RTM helicopter user action event
SelectedRotorLibActionPerformed
RTM helicopter user action event
SelectedRotorLibActionChanged
RTM helicopter user action event
Curator
LALocalLELocal
Arma 3: Curator Event Handlers are also added with the addEventHandler command. They are executed only where the curator is local - on the machine that is in control of it.
CuratorFeedbackMessage
LALocal
Triggered when curator attempts invalid action in curator interface.
Each error has its own unique ID, recognized values are:
- 003 - when trying to teleport camera outside of curatorCameraArea
- 101 - trying to place an object when placing is disabled using setCuratorCoef "place"
- 102 - trying to place an object which is too expensive (cost set in curatorObjectRegistered multiplied by setCuratorCoef "place" is larger than curatorPoints)
- 103 - trying to place an object outside of curatorEditingArea
- 104 - items of a placed composition were skipped / could not be placed (since Arma 3 v2.06)
- 201 - trying to place a waypoint when waypoint placing is disabled
- 202 - trying to place a waypoint which is too expensive (cost set by setCuratorWaypointCost multiplied by setCuratorCoef "place" is larger than curatorPoints)
- 206 - trying to place a waypoint when no AI unit is selected
- 301 - trying to move or rotate an entity when editing is disabled using setCuratorCoef "edit"
- 302 - trying to move or rotate an entity when it is too expensive (entity cost multiplied by setCuratorCoef "edit" is larger than curatorPoints)
- 303 - trying to move an entity outside of curatorEditingArea
- 304 - trying to move or rotate an entity which is outside of curatorEditingArea
- 307 - trying to move or rotate a player (players cannot be manipulated with)
- 401 - trying to delete an entity when deleting is disabled using setCuratorCoef "delete"
- 402 - trying to delete an entity which is too expensive (cost multiplied by setCuratorCoef "delete" is larger than curatorPoints)
- 404 - trying to delete an entity which is outside of curatorEditingArea
- 405 - trying to delete an entity which has non-editable crew in it
- 407 - trying to delete a player (players cannot be manipulated with)
- 501 - trying to destroy an object when destroying is disabled using setCuratorCoef "destroy"
- 502 - trying to destroy an object which is too expensive (cost multiplied by setCuratorCoef "destroy" is larger than curatorPoints)
- 504 - trying to destroy an object which is outside of curatorEditingArea
- 505 - trying to destroy an object which has non-editable crew in it
- 506 - trying to destroy an object when no object is selected
- 507 - trying to destroy a player (players cannot be manipulated with)
CuratorGroupDoubleClicked
LALocal
Triggered when a group is double-clicked on in curator interface.
CuratorGroupPlaced
LALocal
Triggered when new group is placed in curator interface.
CuratorGroupSelectionChanged
LALocal
Triggered when a group is selected in curator interface.
CuratorMarkerDeleted
LALocal
Triggered when a marker is deleted in curator interface.
CuratorMarkerDoubleClicked
LALocal
Triggered when a marker is double-clicked on in curator interface.
CuratorMarkerEdited
LALocal
Triggered when a marker is moved in curator interface.
CuratorMarkerPlaced
LALocal
Triggered when new marker is placed in curator interface.
CuratorMarkerSelectionChanged
LALocal
Triggered when a marker is selected in curator interface.
CuratorObjectDeleted
LALocal
Triggered when an object is deleted in curator interface.
CuratorObjectDoubleClicked
LALocal
Triggered when an object is double-clicked on in curator interface.
CuratorObjectEdited
LALocal
Triggered when an object is moved or rotated in curator interface.
CuratorObjectPlaced
LALocal
Triggered when new object is placed in curator interface.
This event handler will trigger individually for each unit in a placed group - excluding the crew in vehicles.
CuratorObjectRegistered
LALocal
Triggered when player enters curator interface. Assign curator cost to every object in the game.
This is the primary method that a mission designer can use to limit the objects a curator can place.
- curator: Object
- input: Array of Strings - all CfgVehicles classes
CuratorObjectSelectionChanged
LALocal
Triggered when an object is selected in curator interface.
CuratorPinged
LALocal
Triggered when a player pings his curator(s) by pressing Zeus key.
CuratorSelectionPresetLoaded
LALocal
Triggered when a selection preset is loaded using the respective number key or through script.
CuratorSelectionPresetSaved
LALocal
Triggered when a selection preset is saved using the respective CTRL + number key or set through script.
CuratorWaypointDeleted
LALocal
Triggered when a waypoint is deleted in curator interface.
CuratorWaypointDoubleClicked
LALocal
Triggered when a waypoint is double-clicked on in curator interface.
CuratorWaypointEdited
LALocal
Triggered when a waypoint is moved in curator interface.
CuratorWaypointPlaced
LALocal
Triggered when new waypoint is placed in curator interface.
CuratorWaypointSelectionChanged
LALocal
Triggered when a waypoint is selected in curator interface.
Multiplayer Event Handlers
Global object event handler, executed on every connected machine.
Commands:
MPHit
GAGlobalGEGlobal
Triggered when the unit is hit/damaged. EH can be added on any machine and EH code will trigger globally on every connected client and server.
This EH is clever enough to be triggered globally only once even if added on all clients or a single client that is then disconnected, EH will still trigger globally only once.
Is not always triggered when unit is killed by a hit. Most of the time only the killed event handler is triggered when a unit dies from a hit. The hit EH will not necessarily fire if only minor damage occurred (e.g. firing a bullet at a tank), even though the damage increased. Can also trigger several times for an explosion (direct and indirect damage). Does not fire when a unit is set to allowDamage false. However it will fire with "HandleDamage" EH added alongside stopping unit from taking damage (unit addEventHandler ["HandleDamage", { 0 }];. Will not trigger once the unit is dead.
Note: call a function from the MPHit EH code space rather than defining the full code in there directly. The reason is the code space will be transferred over network on each event activation - so keep the data as small as possible!
- unit: Object - object the event handler is assigned to
- causedBy: Object - object that caused the damage. Contains the unit itself in case of collisions.
- damage: Number - level of damage caused by the hit
- 1.66 instigator: Object - person who pulled the trigger
MPKilled
GAGlobalGEGlobal
Triggered when the unit is killed. EH can be added on any machine and EH code will trigger globally on every connected client and server.
This EH has a safeguard measure so that even if it's added on all clients or a single client that is then disconnected, EH will still trigger globally only once per client.
- unit: Object - object the event handler is assigned to
- killer: Object - object that killed the unit. Contains the unit itself in case of collisions
- 1.66 instigator: Object - person who pulled the trigger
- 1.68 useEffects: Boolean - same as useEffects in setDamage alt syntax
MPRespawn
GAGlobalLELocal
Triggered when a unit, it is assigned to, respawns. This EH does not work as one would expect MP EH should work like.
It is only triggered on one machine where the unit it was assigned to is local.
The only difference between Respawn and MPRespawn is that MPRespawn can be assigned from anywhere while Respawn requires the unit to be local.
MPRespawn EH expects the EH code to return array in format of Position, which will be used to place respawned unit at desired coordinates.
For example: player addMPEventHandler ["MPRespawn", { [1234, 1234, 0] }]; will place player at [1234,1234,0] immediately on respawn.
Mission Event Handlers
Mission Event Handlers are specific EHs that are anchored to the running mission and automatically removed when mission is over.
Commands:
UserAction Event Handlers
UserAction Event Handlers are events that trigger on user action.
Commands:
Projectile Event Handlers
Commands:
Deleted
- projectile: Object
Deflected
- projectile: Object
- pos: Array format PositionASL
- velocity: Array format Vector3D
- hitObject: Object - the object that deflected the projectile
Explode
- projectile: Object
- pos: Array format PositionASL
- velocity: Array format Vector3D
HitExplosion
- projectile: Object
- hitEntity: Object
- projectileOwner: Object
- hitSelections: Array of Arrays - Same list of FireGeometry components that entity HitPart gets but only contains:
- position: Array format PositionASL - position of impact
- vector: Array format Vector3D - vector that is orthogonal (perpendicular) to the surface struck. For example, if a wall was hit, vector would be pointing out of the wall at a 90 degree angle
- selection: String - Named selection of the object that was hit, in the FireGeometry LOD.
- radius: Number - radius (size) of component hit
- surface: String - surface type struck
HitPart
- projectile: Object
- hitEntity: Object
- projectileOwner: Object
- pos: Array format PositionASL
- velocity: Array format Vector3D
- normal: Array format Vector3D
- components: Array of Strings - The selections that were hit, in the FireGeometry LOD.
- radius: Number - radius (size) of the hitPoint
- surfaceType: String
Init
Triggered whenever a projectile is created. Cannot be used in scripts, only inside class Eventhandlers in config.
init = "params ['_projectile'];";
- projectile: Object - object the event handler is assigned to
MineActivated
Penetrated
This event fires as many times as the projectile penetrates a surface.
- projectile: Object
- hitObject: Object
- surfaceType: String - see surfaceType
- entryPoint: Array format PositionASL - the projectile's entry point
- exitPoint: Array format PositionASL - the projectile's exit point
- exitVector: Array format Vector - speed/angle exit vector (see vectorMagnitude to obtain the speed, in metre per second)
SubmunitionCreated
This event fires as many times as submunitions are created.
- projectile: Object
- subMunitionProjectile: Object
- pos: Array format PositionASL
- velocity: Array format Vector3D
Group Event Handlers
Commands:
UnitJoined
UnitLeft
VehicleAdded
VehicleRemoved
Empty
- group: Group
Deleted
- group: Group
Local
- group: Group
CombatModeChanged
Triggers when the group's behaviour changes (see behaviour, setBehaviour)
- group: Group
- newMode: String - see AI Behaviour (not Combat Modes!)
CommandChanged
- group: Group
- newCommand: String, can be one of:
↑ Back to spoiler's top"NO CMD" NoCommand "WAIT" Wait "ATTACK" Attack "Suppress" Suppress "HIDE" Hide "MOVE" Move "HOOK CARGO" HookCargo "UNHOOK CARGO" UnhookCargo "VIV GETIN" ViVGetIn "VIV GETOUT" ViVGetOut "VIV UNLOAD" ViVUnload "HEAL" Heal "REPAIR" Repair "REFUEL" Refuel "REARM" Rearm "SUPPORT" Support "JOIN" Join "GET IN" GetIn "FIRE" Fire "GET OUT" GetOut "STOP" Stop "EXPECT" Expect "ACTION" Action "SCRIPTED" Scripted "DISMISS" Dismiss "HEAL SOLDIER" HealSoldier "PATCH SOLDIER" PatchSoldier "FIRST AID" FirstAid "HEAL SELF" HealSoldierSelf "ATTACK AND FIRE" AttackAndFire "CARRY SOLDIER" CarrySoldier "DROP CARRIED" DropCarried "TAKE BAG" TakeBag "ASSEMBLE" Assemble "DISASSEMBLE" DisAssemble "DROP BAG" DropBag "OPEN BAG" OpenBag "IRLASER ON" IRLaserOn "IRLASER OFF" IRLaserOff "GUN LIGHT ON" GunLightOn "GUN LIGHT OFF" GunLightOff "FIRE AT POSITION" FireAtPosition "REPAIR VEHICLE" RepairVehicle "OPEN PARA" OpenParachute "KEEP DEPTH LEADER" KeepDepthLeader "KEEP DEPTH UND SURF" KeepDepthUnderSurface "KEEP DEPTH ABV SURF" KeepDepthAboveSurface "KEEP DEPTH BOTTOM" KeepDepthBottom "PUT IN" PutIn "UNLOAD FROM" UnloadFrom "USE CONTAINER MAGAZINE" UseContainerMagazine "ACTIVATE MINE" ActivateMine "DISABLE MINE" DisableMine
FormationChanged
- group: Group
- newFormation: String - see setFormation
SpeedModeChanged
- group: Group
- newSpeedMode: String - see setSpeedMode
EnableAttackChanged
LeaderChanged
GroupIdChanged
KnowsAboutChanged
WaypointComplete
Fleeing
EnemyDetected
Player's UI Event Handlers
In Game UI Event Handlers trigger when user scrolls or activates in game action menu.
The following mission EHs are available in Arma 3:
- PrevAction - Action menu scroll up event
- Action - Action menu action event
- NextAction - Action menu scroll down event
Commands:
UI Event Handlers (Displays and Controls)
Commands:
- ctrlAddEventHandler
- ctrlRemoveEventHandler
- ctrlRemoveAllEventHandlers
- displayAddEventHandler
- displayRemoveEventHandler
- displayRemoveAllEventHandlers
Music Event Handlers
Music event handler, always executed on the computer where it was added.
Commands:
MusicStart
Triggers when CfgMusic sound starts playing, after being executed with playMusic command.
- musicClassName: String - CfgMusic class name of the music that started
- eventHandlerId: Number - EH id returned by addMusicEventHandler
- 2.18 currentPosition Number - current playback position in 0...1 range (see also: getMusicPlayedTime)
- 2.18 totalLength Number - track total length in seconds
MusicStop
Triggers when CfgMusic sound finished playing, after being executed with playMusic command.
2.14 playMusic "" triggers this event if a music is currently playing.
- musicClassName: String - CfgMusic class name of the music that stopped
- eventHandlerId: Number - EH id returned by addMusicEventHandler
- 2.18 currentPosition Number - current playback position in 0...1 range (see also: getMusicPlayedTime)
- 2.18 totalLength Number - track total length in seconds
Eden Editor
Commands:
Public Variable Broadcast Event
Commands:
Triggers when missionNamespace variable EH is associated with is sent over network via publicVariable, publicVariableServer or publicVariableClient commands.
Weapon Config Muzzle Events
There are 3 event handlers that could be set on weapon in config, "Fired" - when muzzle fired, "Reload" - before muzzle is reloaded, "Reloaded" - after muzzle is reloaded.
class CfgWeapons
{
class RifleCore;
class Rifle : RifleCore
{
class EventHandlers
{
fired = "systemchat format['fired EH output: %1 [time: %2]', _this, time]";
reload = "systemchat format['reload EH output: %1 [time: %2]', _this, time]";
reloaded = "systemchat format['reloaded EH output: %1 [time: %2]', _this, time]";
};
};
};
BI Scripted Events
Commands:
- BIS_fnc_addScriptedEventHandler
- BIS_fnc_removeScriptedEventHandler
- BIS_fnc_removeAllScriptedEventHandlers
- BIS_fnc_callScriptedEventHandler